DIY fixDifficulty: Easy

Samsung TV No Sound? Fixes to Try in Order

Title card reading Samsung TV No Sound: Fixes by Menu Path and Model Year on a teal background

Quick Answer

A Samsung TV with picture but no sound is usually a setting or a connection, not broken speakers. Samsung US starts with a cold boot (hold the remote's Power button), the Sound Test and a software update check. Then make sure the TV speaker is the selected output and try Reset Sound. Menu names vary by model year, so check your TV's e-Manual or Samsung US support. Request service if it still fails.

On this page
  1. Why does my Samsung TV have no sound?
  2. What are the quick fixes to try first?
  3. How do I reset Samsung TV sound settings on my model year?
  4. Why is there no sound on my Samsung TV when I use a soundbar or external speaker?
  5. How do I check HDMI cables and the connected device?
  6. When should I factory reset the TV or call Samsung?
  7. Frequently Asked Questions
  8. Our Take
  9. Sources

Key Takeaways

  • Samsung US lists a cold boot (hold the remote's Power button), the Sound Test and a software update check as the first steps.
  • If you removed or switched off a soundbar, set the TV's output back to its own speakers.
  • On some models Reset Sound sits under Sound, Expert Settings, but menu names and paths vary by model year; check your TV's e-Manual or Samsung US support.
  • For a soundbar over HDMI, a Samsung regional page says that on some models you set HDMI-eARC Mode to Auto and Digital Output Audio Format to Pass-through.
  • A full factory reset erases settings (not network) and signs you out of apps, so it comes last.

Why does my Samsung TV have no sound?

When a Samsung TV shows a picture but plays no sound, the cause is usually a setting, a loose connection or a stuck software state, not a dead speaker. Samsung's own audio troubleshooting page starts with a built-in Sound Test, then a software update check and a "cold boot" (holding the remote's Power button until the TV switches off and on again), and only then points to service [1].

Samsung TV no sound: fix order Five steps from cold boot to service, with the soundbar branch marked in amber. 1. Cold boot (hold Power) 2. Sound Test 3. Sound Output = TV Speaker 4. Reset Sound, then update 5. Factory reset, then service Soundbar or HDMI? Check ARC/eARC at step 3
Work top to bottom and test the sound after each step.

The fixes below follow Samsung's order, cheapest first. Do them one at a time and play something after each, so you know which one worked. If you are also fixing other gear around the TV, our TVs & Electronics guides collect the rest.

What you noticeLikely causeStart here
No sound on every app and inputA setting or software glitchCold boot and Sound Test
Sound from the TV speakers is gone after connecting a soundbarOutput is set to the other deviceSound Output
No sound from a soundbar on HDMIARC or eARC settingsThe external speaker section
No sound on one input onlyThe cable, port or source deviceThe HDMI section
Sound stopped after an updateSoftware stateReset Sound

What are the quick fixes to try first?

These are free and fully reversible.

  1. Do a cold boot. While the TV is on, press and hold the Power button on the remote until the TV turns off and back on, then check the audio [1].
  2. Run the Sound Test. On the page Samsung lists for US TVs, go to All Settings, then Support, then Device Care, then Self Diagnosis, then Sound Test, and follow the prompts. Samsung says that if the problem shows up during the test, you should request service [1]. Samsung's Canadian page gives a shorter path, Settings, Support, Self Diagnosis, so menu names vary by model [2].
  3. Check for a software update. Go to All Settings, then Support, then Software Update. Samsung says this mostly matters if the problem began after a previous update. Update any connected device too [1].
  4. Make sure the TV is not set to another speaker. On some models, Samsung's Canadian page says to go to Settings, then Sound, then Sound Output, and choose TV Speaker [2]. The exact menu name varies by model year, so if you do not see it, search your TV's built-in e-Manual or Samsung US support for your model.

Start with the cold boot, because it is the only reset step on Samsung's US audio page and it changes no settings. [1]

How do I reset Samsung TV sound settings on my model year?

Menu names and paths vary by model year, region and software version, so treat the steps here as a guide and check your own TV's menu first. On some models, Samsung's Canadian support pages put Reset Sound under Sound, then Expert Settings, near the bottom of the list [2] [3]. The same pages show two common ways in [3]:

Samsung sound menu path by model year Two columns compare the path to Reset Sound on 2022 and newer TVs versus 2021 and older TVs. 2022 and newer 2021 and older Settings Home (Smart Hub) All Settings Settings Sound Sound Expert Settings Expert Settings Reset Sound Reset Sound confirm: Reset confirm: Yes
Common paths on some models, per Samsung Canada. Your TV's menu may differ; check its e-Manual.
  • On some newer models (2022 and later, per Samsung Canada): Settings, then All Settings, then Sound.
  • On some older models (2021 and earlier, per Samsung Canada): Home, then Settings, then Sound.

Samsung's Canadian page says which settings you see depends on the TV model, the year it was made, active features and software version [3]. Samsung's US reset page also says menus differ and points you to your model's manual if the steps do not match [5]. If your menu looks different, search "Reset Sound" in your TV's built-in e-Manual, or look up your model number on Samsung US support.

On models that have it, Reset Sound returns only the sound settings to their factory defaults, so try it before a full TV reset. [3]

Why is there no sound on my Samsung TV when I use a soundbar or external speaker?

When the picture works but the sound is missing after you add a soundbar or receiver, the TV may be sending audio to the wrong place or in a format the speaker cannot use. Samsung's Gulf regional soundbar page gives this order for HDMI eARC and ARC [4]. Setting names differ between model years and regions, so confirm them in your TV's e-Manual or on Samsung US support for your model:

TV to soundbar over HDMI ARC or eARC A TV and a soundbar joined by an HDMI cable, with the settings to check at each end. Samsung TV HDMI (eARC/ARC) port Speaker Select Soundbar ARC/eARC port Powered, right input HDMI cable On the TV: Sound, Expert Settings HDMI-eARC Mode: Auto Digital Output Audio Format: Pass-through Both devices must support eARC
Both ends must support eARC. Setting names vary by model; check your TV's e-Manual.
  1. Check the TV's audio settings. On some models, the page says to go to Settings, then Sound, then Expert Settings, and set HDMI-eARC Mode to Auto and Digital Output Audio Format to Pass-through. It also notes eARC works only if both the TV and the soundbar support it.
  2. Select the soundbar as the output. On some models this is under Sound, as Speaker Select or Sound Output; choose your soundbar.
  3. Power the soundbar on and choose its input. It must be on, and its source set to the input that connects to the TV.
  4. Check the cables. Make sure every cable is firmly connected and replace any that are damaged or loose.
  5. Isolate the problem. Connect another device, such as a laptop or game console, to the soundbar to see whether it makes sound.

If the problem continues, the same page suggests updating the TV, checking the soundbar maker's app or site for an update, and resetting both devices to defaults before setting the connection up again [4].

That Samsung page is an Emirates regional page, and it covers only HDMI eARC and ARC. It gives no steps for optical or Bluetooth connections, so for those, check your soundbar's manual.

If you later remove the soundbar, set the TV's output back to its own speakers (on some models, Sound Output, then TV Speaker) [2].

How do I check HDMI cables and the connected device?

If sound is missing or cutting out on one input only, look at the connection before you blame the TV. Samsung's steps [1]:

  • Reconnect the cable at both ends. Loose connections can cause dropouts. If they continue, try a new cable.
  • Try a different HDMI port. If the problem happens on only one port, Samsung says to request service.
  • Run the HDMI Cable Test. Select the HDMI input, then go to All Settings, Support, Device Care, Self Diagnosis, Signal Information, HDMI Cable Test. It is meant for cables under 2 m and for video devices, not soundbars or home theater systems. Some models only have it after a software update and older models do not have it. If it reports a bad cable, replace the cable. Service is not needed.
  • Connect a different device with the same cables. If its audio is fine, the original device is the problem, so contact its maker. For a set-top box, Samsung points you to your cable or satellite provider.

The same approach, one connection at a time, applies to other gadgets that lose their link. Our HP printer offline guide follows the same restart-first order.

When should I factory reset the TV or call Samsung?

A full TV reset is the last software step. On Samsung's US page, go to Settings, then General & Privacy, then Reset, enter your PIN (the default is 0000), and select Reset, then OK. The TV restarts on its own [5]. If that path is missing, Samsung says to try Settings, Support, Self Diagnosis, where Reset appears; on some models you go through Device Care first [5].

Know what you lose. Samsung says the reset restores all TV settings except network settings, it is not available while an app such as Netflix, YouTube or Hulu is open, and all your apps need to be signed into again afterward [5]. Reset Smart Hub is a different, larger reset that also deletes Samsung account information, linked accounts and Smart Hub apps [5].

If the Sound Test fails, sound still drops out with a second device connected, or one HDMI port is bad, Samsung says to request service through its Support Center [1]. Do not open the back of the TV. It contains high-voltage parts that are not for home repair. Unplug it before you move it or reach around the ports. For how we choose and check sources, read our editorial policy and about page. If a different appliance in your home is showing a code, try our error code lookup.

For more gear that fails in the same way, see our garage door opener guide.

Frequently Asked Questions

Why does my Samsung TV have a picture but no sound?

It is often a setting, a connection or a stuck software state. Samsung's audio page starts with a cold boot, the Sound Test and a software update check. If you use a soundbar, also check that Sound Output is set to the right device.

How do I do a cold boot on a Samsung TV?

While the TV is on, press and hold the Power button on the remote until the TV turns off and back on, then check the audio.

Where is Reset Sound on a Samsung TV?

On some models it is under Sound, then Expert Settings, near the bottom of the list. Samsung's Canadian pages show newer TVs opening this through Settings, then All Settings, and older ones through Home, then Settings. Menu names vary by model year, so if you cannot find it, search your TV's e-Manual or Samsung US support for your model.

Why is there no sound from my soundbar on my Samsung TV?

Check that the soundbar is on and set to the right input, that it is chosen as the TV's sound output, and that both devices use the ARC or eARC port. A Samsung regional page says that on some models you set HDMI-eARC Mode to Auto and Digital Output Audio Format to Pass-through; setting names vary, so confirm them in your TV's e-Manual.

Our Take

Our Take: we think most no-sound cases on a Samsung TV are fixed by the free steps, so we would work through them in Samsung's order and stop when sound returns. In our view the cold boot is the best first move, since it changes nothing and takes a minute. We would try Reset Sound before the full factory reset, because it touches only audio settings and the full reset signs you out of every app. Menu names differ by model year and region, and some menu paths here come from Samsung's Canadian and Gulf pages, so we would trust your own TV's menu and e-Manual over any guide. If a second device on the same cable and port works, and the Sound Test fails, call Samsung rather than opening the TV.

Sources

  1. Samsung TV has very low or no audio. Samsung Electronics America.
  2. Solutions for Samsung TV sound adjustments. Samsung Canada.
  3. How to reset sound settings on your Samsung TV. Samsung Canada.
  4. What to do if there is no sound when connecting the Samsung TV to the sound bar?. Samsung Gulf (UAE).
  5. How to reset your Samsung TV. Samsung Electronics America.

Repair information is general guidance. Unplug the appliance and shut off water or gas before working on it, follow your owner's manual, and call a qualified technician for gas, refrigerant or high-voltage work. Spotted an error? Tell us.